AFTek manufactures a full line of Resistor Control Stations (GRIDS), and the ONLY resistor controlled MIG welding system.

The patented AFTek Demand Pulse MIG Welding System can weld with any commercial solid wire, any commercial flux-core, including self-shielded wires which are made for constant voltage only operation. While the AFTek System is "Constant Current", the Demand Pulse Control simulates Constant Voltage in such a way that all the CV processes can be used. Exceptional performance with high nickel and stainless steel, aluminum, and of course, corbon stells.

AFTek controls can be furnished in a variety of packages from stand-alone singles to racks of eight arcs with a single connector.

AFTek Resistor Control Stations are built with exclusive Edge-Wound Resistors, using a proprietary alloy of iron and aluminum. In normal use, the resistors are rust-resistant, and run cooler than most. Switches are the heaviest duty we can obtain, and nothing is spared to furnish you with the highest quality product of this kind. The MIG welding system uses simple electronic switches, with high capacity MOSFETS to pulse the output, but at current and voltage levels similar to "short-arc".

If you are looking for exceptional welds, give us a

call.

Part #	Model	Description
		Single Control Station
909001	HPHV80	Single Polarity with shroud "One Hander"
909002	80 volt 195amp	Single polarity for frame (pack) installation
909030	80 volt 245 amp	Single polarity for frame (pack) installation
909035	80 volt 295 amp	Single polarity for frame (pack) installation
909040	80 volt 345 amp	Single polarity for frame (pack) installation
909045	80 volt 395 amp	Single polarity for frame (pack) installation
		Options for single control station
805025	Shroud Packaged	Required if not in "PACK" or frame
805026	Dual Polarity packaged	Front panel switch
990125	Tig Control	Soft start tig control (lift Arc)
805027	Pipeliner Packaged	Single Pulse module for "5P"
805028	Demand Pulse Mig pkg.	Patented pulse, non-short MIG
		Twin control station/single polarity
910000	80 volt 195amp	Twin Single polarity for frame (pack) installation
910012	80 volt 245 amp	Twin Single polarity for frame (pack) installation
910020	80 volt 295 amp	Twin Single polarity for frame (pack) installation
910075	80 volt 345 amp	Twin Single polarity for frame (pack) installation
		Options for Twin control station
805025	Shroud Packaged	Required if not in "PACK" or frame
990125	Tig Control	Soft start tig control (lift Arc)
805035	Dual Polarity packaged	Front panel switch
805036	Pipeliner Packaged	Single Pulse module for "5P"